B15U.com - A Nissan Sentra Forum
02-03 intercooler pipe with fogs intact. How did you clear passenger side?
How did you 02-03 clear the frigging fog lights?
my driver side fogs are clear and good to go, but my passenger side piping is definitely going to eat shit because it's the lowest part of the car.
The only way I can see this happening is if I took a saw and started sawing off the metal that the intercooler pipes go around.
My issue wasn't clearing the passenger, it was the driver. Any pictures of the driver side?
Mine looks about the same, fact of life, unless you wanna start hacking shit up...lol.
Originally Posted by Balyon85
my pipes came from a 04-06 spec V so it was a little different. It was longer going up into the engine bay so it gave me space to put inbetween the pipe
Is that a "universal" style pipe kit? Doesn't look like the tstone or tnetics.
Yea I don't think you can do anything, unless you want to get another charge outlet pipe to raise that intercooler inlet pipe.
02/03 ECU to 04/05 non-NATS ECU swap harnesses
http://www.b15u.com/members-services...p-harness.html
Got a dead ECU? Let me buy them from you.
http://www.b15u.com/parts-wanted/219...tyle-ecus.html
I dont see why people aren't a little more creative. I know mine's not perfect (and not exactly duplicatable) but i'm sure there's ways around it by cutting a couple pipes, tweaking some angles, etc.
"I think we need to do a little street racing 101 and understand that, you know... as a general courtesy you should, uh, floor your car an additional 100mph over the speed in which you start. It's just like the, uh, '100mph courtesy'... You start at 60, you don't let off 'til 160. You start at 30, you AT LEAST go to 130. And attempting to, uh, run like Houston interstates with traffic directly in front of you... These 60 to 80 pulls; these 60 to 95mph pulls... What the fuck is that shit about?" -IMV Films
It*s a ugly ghetto IC piping for a 04-06 but it works :PP
Yea, you're gonna have to cut and/or rotate the pipes accordingly so you can get the best fitment. I'd really hate to drive around with something as important as that and risking damage to it.
02/03 ECU to 04/05 non-NATS ECU swap harnesses
http://www.b15u.com/members-services...p-harness.html
Got a dead ECU? Let me buy them from you.
http://www.b15u.com/parts-wanted/219...tyle-ecus.html
LOL I took a saw to so many parts of my car already. I actually trimmed the metal part down by a lot and sawed parts of my pipe.
Surprisingly this did not scrape on the way out of my driveway which was incredible.
Can't really see the passenger side that well, i also welded a support bracket to it and bolted it to the frame.
Built HQR25DET running on a MS2 and a whole lot of other goodies
I got 2.5 on mine and it fits fine 2003
“I know that you believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant.”
I'm pretty sure treadstone sells individual pieces of their IC piping kit, might want to try buy just that one single piece.
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
