Thread: Nitrous NX part question. Fuel tap

Do you guys only have one stainless steel for fuel? My nitrous kit came eith 2 nitrous lines and 1 fuel line. The fuel line is attached to the solenoid and is 12" long only. Am i suppise to tap a fuel line in the engine bay with a t splitter?
my kit came without the tap T splitter for fuel.

yup. buy some fuel hose and tap it with a T fitting. one outlet will go to the fuel rail, the other will go to the fuel solenoid.

Thanks guys, seems like i'm missing that blue NX tap. Smokey, where did you get your T splitter with a female to fit the stainless stain fuel? Only if you were closer to the city so yu could help.

Originally Posted by frozenbarb

Thanks guys, seems like i'm missing that blue NX tap. Smokey, where did you get your T splitter with a female to fit the stainless stain fuel? Only if you were closer to the city so yu could help.

You can pick up a T fitting at most autozones, value, home depot, ace, etc.

You'll also need the two barbs for the fuel line, t-clamps and an adapter to your stainless steel line.

what size is our fuel line

Its actually 11/32 if you can find it, but most people just use 5/16 and some muscle.

Did you use a brass t fitting?

Sent from my Dell Streak using Tapatalk

Originally Posted by triple5soul

Did you use a brass t fitting?

Sent from my Dell Streak using Tapatalk

Yes. I also tapped an extra 1/8NPT port so I could run a fuel pressure safety switch off it.

zex sells a good 5/16 that has flares instead of the junk nos and nx send with their kits.

Alright im gomna.go.to.home depot to get some fitting

On another note, does anyone know where I can get trflon paste

Sent from my Dell Streak using Tapatalk

Originally Posted by triple5soul

Alright im gomna.go.to.home depot to get some fitting

On another note, does anyone know where I can get trflon paste

Sent from my Dell Streak using Tapatalk

Home Depot in the plumbing section

Alright so im gonna get a 5/16ths T fitting, 2 fittings with barbs for thenfuel line and can I find an adapter in the same section for my SS fuel line to go to the T

Sent from my Dell Streak using Tapatalk

I cant find a T Fitting does the fitting have to be 5/16ths or just the hose fit ti ng? Biggest I can find is a 1/8th npt T

Sent from my Dell Streak using Tapatalk

Originally Posted by triple5soul

I cant find a T Fitting does the fitting have to be 5/16ths or just the hose fit ti ng? Biggest I can find is a 1/8th npt T

Sent from my Dell Streak using Tapatalk

Usually the T fittings will come with two female ports (either 1/4 or 1/8 npt) and you will have to buy the correct sized barb to put in there depending on what size hose you want to run (5/16 in your case). Screw the barbs into the T, attach your hose, connect the feed line to your third port and your good to go when it comes to tapping for fuel.

Zmokey can you post some more pics of your fuel.setup im gonna pick up some line todday and a T im just trying to figure out the easiest way to remove the stock fuel line just cut it off?

Sent from my Dell Streak using Tapatalk