sentra parts for sale - Page 5
B15U.com - A Nissan Sentra Forum
Page 5 of 6 FirstFirst 123456 LastLast
Results 81 to 100 of 111
  1. #81
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Quote Originally Posted by PHXnismospecvAZ View Post
    How bout $90 shipped on the JWT BSR kit
    As of right now I'm keeping it for the other car I'm acquiring. Sry if I change my mind I'll let you know
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  2. Remove Advertisements
    B15U.com
    Advertisements
     

  3. #82
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Ttt
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  4. #83
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  5. Remove Advertisements
    B15U.com
    Advertisements
     

  6. #84
    Senior Member Jon
    Join Date
    Jul 2011
    Location
    Tilton, NH
    Posts
    1,924
    Drives
    03 spec V, 02 specv,Passat,f150,Kawasaki Vulcan,Fleetwood Flair, also drives neighbors crazy!
    Likes Received
    212

    Default

    $25 for pulleys?

  7. #85
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Crank pulley sold
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  8. #86
    Newbie Jose Melano Silva
    Join Date
    Jan 2016
    Location
    Sacramento, CA
    Posts
    38
    Drives
    2005 Nissan Sentra 1.8s
    Likes Received
    1

    Default

    I am interested in the JWT BSR Kit!!!

  9. #87
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  10. #88
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Neo pending sale
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  11. #89
    Senior Member Kris
    Join Date
    Mar 2015
    Location
    Pine Island Florida
    Posts
    9,221
    Rides
    2
    Drives
    Qr20det 2002 spec v
    Likes Received
    1147

    Default

    Damn. Guess I wasn't first in line for that neo?? Thought you were installing it on your car?

    Sent from my XT1028 using Tapatalk

  12. #90
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  13. #91
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Neo sold
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  14. #92
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Ttt
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  15. #93
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Wideband and o2 sensor sold
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  16. #94
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    added top bin and sun visors
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  17. #95
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  18. #96
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  19. #97
    Apprentice
    Join Date
    Aug 2010
    Posts
    845
    Rides
    2
    Drives
    2006 Nissan Sentra 1.8s
    Likes Received
    19

    Default

    Hey home u still have the bar kit?

  20. #98
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump
    First 100 takes the bsr kit for those of you that kept asking
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  21. #99
    Senior Member Kaz
    Join Date
    Dec 2014
    Location
    scranton pa
    Posts
    6,064
    Rides
    1
    Drives
    04 spec v
    Likes Received
    795

    Default

    Bump added cpl things
    Motor - low compression pistons, K1 rods, B16 crank, Bc stage 2 cams, bc valves and titanium retainers, Bsr kit, lower temp thermostats, and a 2j Ps pulley 2j rad and heater hoses

    Transmission- 03 spec v transmission, spec stage 3 clutch, 2j 14lb flywheel, 2j sts and bushings, 2j v2 shift knob

    Suspension- raceland coilovers putting Bc 9k coilovers soon, Nismo fsb, rsb, and strut bar, 4pt trunk bar, 4pt tanabe front brace, 2j 15mm alks, 2j crossmember bushings, weapon r torque damper, tdmi qt link needs to be installed, tdmi hard race control arm bushings, 2j solid motor mounts

    Intake- Nismo cold air intake but using as a short ram intake

    Exhaust- Nismo header, stock midpipe, 2.25 piping to a DC muffler, no rez

    Misc.- greddy ad panel, 2j rad cap, 2j dress up caps, complete 02 spec v interor, 2j 20mm spacers all around,2j 82mm studs. Grounding kit, 2j yellow fogs, 02 spec rims custom painted

  22. #100
    Newbie Kevin
    Join Date
    Feb 2017
    Location
    Shacklefords, VA
    Posts
    10
    Drives
    2003 SE-R Spec V
    Likes Received
    0

    Default

    Still have the top bin and shift knob? If so how much will you take for both?

 

 
Page 5 of 6 FirstFirst 123456 LastLast

Similar Threads

  1. 2005 nissan Sentra parts for sale.
    By Sfbayarea78 in forum Parts for Sale
    Replies: 164
    Last Post: 01-15-2014, 12:47 PM
  2. The Last of My Sentra life parts sale!
    By kottkamp44 in forum Parts for Sale
    Replies: 14
    Last Post: 08-26-2013, 09:18 AM
  3. Rolled 2002 Sentra SE-R Spec V parts for sale
    By Marcus in forum Parts for Sale
    Replies: 41
    Last Post: 01-24-2012, 10:28 AM
  4. 2005 Sentra Parts for Sale
    By specv-it in forum Parts for Sale
    Replies: 12
    Last Post: 10-31-2011, 09:06 PM
  5. 2005 Nissan Sentra SE-R Spec V Parts for Sale – Salvage Car
    By YawMomentRacing in forum Vehicles for Sale
    Replies: 8
    Last Post: 07-22-2010, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •