A Nissan Sentra Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 32 Results
  1. Sentra Specific Installation Guides,Technical Info
    Was looking around autozone for some stuff and came across these bushings. It looked like it had the same ID to fit over the radiator nipple thingy and a good enough OD to fit inside the stock rubber bushing. "And it FITS!!" You can buy it at any auto parts store that sells HELP products. It's...
  2. Sentra Specific Installation Guides,Technical Info
    Written By: kc03specv First, get the car up on the lift, or jack stands. And get the bumper off. Next, i took out my Battery just to make my life easier. Me using a 10mm and stuby rachet to Loosen the T-bolt clamps. (They are a pain, but work oh so good.) I dropped the Screw driver...
  3. Suspension, Chassis & Braking
    http://www.stoptech.com/tech_info/wp_warped_brakedisk.shtml# "The term "warped brake disc" has been in common use in motor racing for decades. When a driver reports a vibration under hard braking, inexperienced crews, after checking for (and not finding) cracks often attribute the vibration to...
  4. Sentra Specific Installation Guides,Technical Info
    Wanted to share with you guys on how to get wheelhop completly out. It works best with or without motor mount inserts. It stiffens up your engine so it doesnt move in between upshifts or downshifts. you will notice very lil vibration but not much. Your launching and shifting will feel so much...
  5. Parts for Sale
    These inserts will replace the flimsy rubber bushings, that serve as isolators between the engine cross-member, and frame/subframe of the vehicle. Many people have used washers, with good success, but, this part will fit perfectly in the inside diameter (hole) in the engine cross-member, then...
  6. B15 Sentra (2000 - 2006)
    took the spoiler off yesterday. and put some rubber plugs in for now. not sure if i should leave it off or put it back on. what do you guys think?
  7. Sentra Specific Installation Guides,Technical Info
    Andreas Miko: How to Put a QR B15 6 Speed Trans on Sr20de Yahnoza: How To: P11 5 Speed Conversion Chrisinky: How To : 6 Speed in a P11 Auto to Manual: Easy to find Spec V trans 02-06 Spec V center console or any other manual b15 or mod current one Spec V axles w/o ABS Spec V throw out...
  8. B15 Sentra (2000 - 2006)
    i made these out of abs.. main benefit is so i dont get rock chips on my doors, and chip my rear lip up... does anyone have access to a much thinner abs sheet where it can flex? krystian paid 50 bucks for rally armor.. i made these for free lol.. BUT it is a very stiff plastic... so...
  9. Parts for Sale
    I HAVE A 12INCH ALPINE TYPE R FOR SALE FOR $120 0B0. THE SUB IS IN PERFECT WORKING CONDITION AND DOES NOT COME WITH A BOX. IT HAS A MINOR NITCH IN THE RUBBER SURROUNDING. ITS NOT RIPPED OR TORN AND DOES NOT EFFECT THE PERFORMANCE OF THE SUB. I'VE HAD THIS SUB IN MY CIVIC FOR LESS THEN A YEAR AND...
  10. Sentra Specific Installation Guides,Technical Info
    Instead of buying a Walbro 255, u have another choice which is the 190 WRX (non sti) fuel pump. you can find them as low as $25. I bought mine for $35 shipped. To do this all u need is the fuel pump, u can reuse all ur stock stuff. First locate your Fuel pump fuse. It is behind the coin...
  11. Member Rides and Project Cars
    hey folks, just wanted to drop some pics of the ride, mostly cosmetic with a couple other mods, spring time shoudl brign around the fsb rsb, get some rubber for the nismo rims, exhaust and hids stock first day the led obession begins the stubby! clear corners/grille/mach 1 lip strut bar &...
  12. Sentra Specific Installation Guides,Technical Info
    How to Size and Drill Fuel Rails (Fuel Rail Worksheet) Extrudabody offers fuel rails in many lengths with two options for injector mounting holes: predrilled or undrilled. Undrilled fuel rails are available in 3 standard lengths (8", 18", and 24") and are made for customers who can tackle hole...
  13. B15 Sentra (2000 - 2006)
    well my car has been parked up now for a month and a half. exposed to the elements. ive notice in the trunk on the left side (driver) the matt is damped... well soaked.. and my mechanic gloves which i layed there are soaked too. the rubber around my trunk is fine and there isnt leaves or...
  14. Sentra Specific Installation Guides,Technical Info
    Alright, for this install you will need: -A Phillips Head Screwdriver -Needle Nose Pliars (for removal of retaining clip, optional) -A 10mm socket with small drive* -Socket extention* *If you run into the problem I did -some sort of cleaning oil/lubrican First, get familiar with what you are...
  15. B15 Sentra (2000 - 2006)
    Ima start bringing the Civic to the meet instead. i'm having alot of bad luck before and after meets. Ok, After the meet I was driving back on the Belt parkway and out of no were I heard a explosion, then i smelt burn rubber. My front passenger tire just Blew off of my rim. When that happen...
  16. B15 Sentra (2000 - 2006)
    My car is still at nissan and today they called me to let me know they would not be putting my UR pulley on the new motor they are putting in because it does not have a "rubber guard" on it like the stock one has. they are putting my full exhaust with dummy 2nd o2 sensor and three peice race...
1-16 of 32 Results
Top