A Nissan Sentra Forum banner


  1. apexi afc neo

    Parts for Sale
    pm me if interested
  2. afc neo

    Parts for Sale
    i have a apexi afc neo. if interested please pm me
  3. Safc2 and innovate wide band

    Parts for Sale
    Selling my safc2 with extended harness and innovate wideband (brand new ) 350 shipped obo hmu with a text for fast response 6262301389
  4. Cluster Surround Trim/ Walbro 190LPH For Sale

    Parts for Sale
    Up for sale- my parts I am never going to use. These are priced to go. I swear I always sell stuff for way too cheap, but I own a sentra just like you. PM me for paypal or if you have questions. I am located relatively close to Louisville,KY. 1.Steering column cover/cluster surround(i have...
  5. All B15 Models B15 Sunglass Holder Sharkey SAFC Pod and Black SAFC2

    Parts for Sale
    Item Price: $200 Shipped Item Condition: Used Item Location: Norfolk, VA Shipping Options: Local pick-up , Continental US , ALL US States & Territories Acceptable Means of Payment: Paypal , Cash My Name: Mike Nichols Contact Information: PM or text 571-217-2175 Have a custom Sharkey...
  6. For sale: Apex-i SAFC, Nismo graphics kit, and 5P ecm from an 02 spec-v

    Parts for Sale
    for sale is an Apex-i SAFC $120 obo Nismo Graphics kit (originally bought from sunburst v on gta sentra)the kit is missing the left front fender stripe, but this can easily be replaced by most print shops $120 obo 5P ECM for an 02 sentra spec-v $100 obo
  7. FS: safc2, and 2 walbro 255 pumps

    Parts for Sale
    SAFCII Blue/Silver - $150 shipped comes with complete harness, and base. Reason for sale, I'm going with an FI/C and a tune over winter and am not going to need the safc anymore, Removing it from the car tomorrow. Walbro 255lph Fuel Pump - $70 Shipped, $140 shipped for both pumps. comes...
  8. Uprev log

    Uprev Osiris & Cipher
    I'm new to the whole datalogging/tuning thing. I've been reading as much as I can find. I logged this today. Please take a look and comment. Right now I'm running N/A. Should I lean it out some? It seems to be running a pretty steady AFR of 13. Thanks for any help / comments. -Gary
  9. 2 simple questions about going turbo

    Forced Induction & Supporting Modifications
    Just a couple simple questions. Turboing my 06 spec v and I need to know where is the best place to run my oil feed line to from the Turbo? And can I put the maf between the bov and throttle plate and vent to atmosphere or does it need to be after the bov or does it need to be on the intake pipe...
  10. turbo

    Tuning & Engine Management
    I have an 04 spec v that I'm fixing to turbo and using safc2 to tune it but I live about 50 miles from somewhere that can tune the car for me...is there any way I can tune it myself to make it driveable or am I better off having it towed?
  11. Gettin' My Car "Dynoed" After Work

    Tuning & Engine Management
    Wassup Guys, Today after work, my co-worker a "Honda Head with a K swapped hatchback" is gonna dyno my car off his laptop..... weird cuz he's not gonna use a dyno machine, he says he's been tuning his car for the past year with this (link below) and says it's been the best $150 investment yet...
  12. How to make a piggy back hold a tune

    Tuning & Engine Management
    Saw this posted by Big Jizzay on MotoIQ...interesting read. http://www.motoiq.com/Forum/tabid/63/aff/14/aft/75/afv/topic/Default.aspx ------------------------- If you have an ok grasp on how modern fuel injection theory, this'll make sense. Most people will agree a piggyback will do nothing...
  13. Still having problems with the SAFCII

    Tuning & Engine Management
    hey whats up guys, i posted alittle while back with some problems i was having with the SAFCII, well i got the thing fully wired and i got nothing, the piece doesnt even turn on, has anyone wired this into an 06 cause something with the wiring diagram just doesnt make sense to me, all the ports...
  14. All B15 Models Understanding safc high/low throttle point settings

    General Guides, Documents & Downloads
    an explanation of how safc2 determines and uses both hi/low throttle maps to calculate the adjustment needed. It goes off the assumption that throttle plate can be somewhat related to load on the engine. so for example: lo th=30 hi th=60 lo map @ 4000 rpm = +5 hi map @ 4000 rpm = -15...
  15. 02-06 SAFC and NEO install

    Sentra Specific Installation Guides,Technical Info
    Written By: KingDNH First unplug the battery's negative terminal: Then remove the strut tower brace and the mount from the passenger's side (you'll need 2 17mm wrenches/sockets for the strut bar and a 12mm wrench for the mount) Then un-clip the harness; you can see the little holder in the...
  16. 02-06 ProCharge (Supercharge) your B15

    Sentra Specific Installation Guides,Technical Info
    Written By: kc03specv First, get the car up on the lift, or jack stands. And get the bumper off. Next, i took out my Battery just to make my life easier. Me using a 10mm and stuby rachet to Loosen the T-bolt clamps. (They are a pain, but work oh so good.) I dropped the Screw driver...
  17. FS: SAFC II

    Parts for Sale
    well since im not turboing my car anymore/i dont have cams/dont want to spend $200 on a wideband, i decided to sell my safc. Im looking to get $200 picked up and im firm on that price, so dont bother wasting your time offering me lower. im in no rush to get rid of this and im not desperate to...
  18. FS: Greddy E-Manage, O2 sensor, rear lip, nitrous purge

    Parts for Sale
    Gotta clean house, I got Greddy E-Manage, w/ software & laptop cable. The guy I bought it from said it was on a boosted 03 with 8 psi. I went with SAFC. $200 I have the middle O2 sensor for guys with 3 sensors. Never used. Sent a friend to the dealership and he got me the wrong one and...
  19. All B15 Models WTB: Safc 2

    Parts Wanted
    as title says im looking for an safc 2 if anyone has one pm me or post here thanks!
  20. All B16 Models Boost Your B16

    B16 Specific Tutorials
    So this is a semi-custom process but can be done by many owners at home, with some help from experienced mechanic friends. This is a semi-detailed (no pics yet) of how to boost the B16 QR25. parts needed: b15 treadstone log manifold b15 treadstone downpipe (heat wrap this before installing)...