A Nissan Sentra Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 29 Results
  1. Sentra Specific Installation Guides,Technical Info
    http://www.youtube.com/watch?v=PSZtP949JHU&feature=related http://www.youtube.com/watch?v=wqXe0ln7-WQ&NR=1
  2. Parts for Sale
    Hello I am selling my complete turbo kit that came of my 03 Spec-V. There is nothing wrong with it just had to many problems with speeding tickets. The kit has Approximately 2,000 miles on it. This is not a cheap E-bay kit all name brand parts. below listed is all the kit will include. 1. Huge...
  3. Member Rides and Project Cars
    I've always had my eyes on a spec v since the first one I seen roll threw my town a couple years back. I bought my first v (a silver 04) when I found out I was becoming a dad and needed a 4 door lol then like an idiot I traded it for a 99 gst cause it was already turbo and I thought fast ha...
  4. Parts for Sale
    Time are tough, hate to start selling off parts, but gotta do what you gotta do. FS: lightly used JWT flywheel, pressure plate, clutch disk, throwout bearing, alignment tool. The good: less than 8,000 on set up, used lightly, great shape The bad: been in storage so there is light surface rust...
  5. Parts for Sale
    It's for a turbonetics evolution wastegate. I tested the shims out and with 7 shims it got me to 12.3 psi. $25 shipped for all.
  6. Sentra Specific Installation Guides,Technical Info
    See attachment.
  7. General Guides, Documents & Downloads
    For the turbine housing you would use M8-1.25 x 25 mm bolts. For the wastegate use 5/16"-18 bolts.
  8. Forced Induction & Supporting Modifications
    So I removed my air filter to clean it and messed it up in the process. I'm running a draw-thru setup and now my car is running into the 9's AFR under WOT. Dips below 10's as soon as I go over 3k rpms. Any ideas? Should I just reset the ecu so it can relearn the trims? Weird shit... BTW, I'm...
  9. Forced Induction & Supporting Modifications
    HERE! say I! I! b15 treadstone manifold 1/2 b15 treadstone DP open dump turbonetics wg hks ssqv bov 10psi daily propsort elec peak/warning boost gauge stock oil press gauge uego wideband apexi safc2 3" VRS catback w/ magnaflow muffler + 12" resonator custom IC piping b15 treadstone FMIC w/...
  10. General Guides, Documents & Downloads
    Before you begin, you should have an idea of what you're aiming for. For EVOs, 19psi (131 kPa) seems to be a safe setting based on what people on the forums have found since it is close to what the stock boost pressure is, yet there is an increase in power due to the Greddy unit keeping the...
  11. Parts for Sale
    I went into DMV today to find out how [bad] I'm doing. Lets just say I had a few points prior to my last pull-over, and I anticipate this won't get any better after my next court visit. I need to take it easy for a while, part of that means selling my Spec V plus all the parts I have for it...
  12. Parts for Sale
    i have a 7lb spring from a evo turbonetics wastegate. If you have a 9lb spring that u would want to trade let me know. If u want we can meet up and i will switch the spring in the wastegate right there.
  13. Forced Induction & Supporting Modifications
    • (1) 5 PSI spring (blue) – 30778-5 • (1) 7 PSI spring (white) – 30778-7 • (1) 9 PSI spring (red) – 30778-9 • (1) Discharge gasket – 20142 • (5) Shims – 20643 You can use the shims to increase the boost pressure. From what I have seen 2-3 shims will gain you one 1 PSI additional boost pressure.
  14. Parts for Sale
    Turbonetics Evolution 38mm Wastegate 5psi Spring Inside and I also have 8psi spring. I don't have any pics b/c it's still on the car. I'll get some pics when I remove it. Here's what it looks like http://www.agpturbo.com/product.php?productid=16147&cat=253&page=1 Price: $150 -------------...
  15. Parts for Sale
    like the title says has everything on it like coils and alternator im asking $250 or a trade for a turbonetics turbo manifold i can drop off this motor at my expense anywhere in nyc
  16. Forced Induction & Supporting Modifications
    Turbonetics - $3495 T3/T4 E-50 Ball Bearing Turbo Spearco intercooler Raptor blow-off valve Evolution wastegate Unichip engine management, or Re-flash ECU Walbro in-tank high-flow fuel pump Stainless oil feed line Taps for oil return and oil feed fittings Polished stainless exhaust...
  17. Parts for Sale
    Name: Larry Locaion: NNJ Contact: PM or respond in thread Price: $550 + shipping Description: I bought this used. Turbo has about 10k-15k miles on it. No shaft play and it spins freely. its the tubo that comes standard with the treadstone kit. Only pic I have right now. I will get some more...
  18. Forced Induction & Supporting Modifications
    From [email protected] I now have the Turbonetics complete turbo kit on blow-out sale pricing. 02-03 kits List $4795 SALE $3500 shipped (lower 48 states) 04-06 kits List $4995 SALE $3800 shipped (lower 48 states) Turbonetics SPEC-V Turbo Kits Include: - Turbonetics T3/T04 E50 Ball Bearing Turbo...
  19. Tuning & Engine Management
    After bugging these guys a bit trying to find out what exactly is going on in their reflash...this is what I got. -------------------------------- The reflash alters the Q (MAF) resolution table of the ECU code. By altering that code it actually adjusts both the fuel and timing curve to target...
1-19 of 29 Results
Top