Search Results for ‘vq35de’

I have a spare 2005 Nissan 350Z 6MT ECU. "U6" HITACHI MEC61-840 D1 5302 FLASHED WITH UPREV NATS DISABLED (so it should work without being reprogrammed to your 350Z/ VQ SENTRA), Running a Base Tune WORKS WITH TLOOF HARNESS for VQ Sentra I was keeping this as a spare and played with the idea...

What are all the parts I need to put a VQHR in my 2005 b15/ or VQDE please give a list below with engine type just in case there are some small differences.

The time has came to sell my VQ Sentra as I’m moving to California and am downsizing to one car. There is 185-195,000 on the body (the newer cluster reads around 141,000). There is 110,000 on the VQ35DE engine it’s out of 06 Nissan Quest (these motors are pretty well protected from abuse versus...

This weekend I finished installing a nonrev vq35de intake plenum, you will need both the lower and upper plenum off a 350z or g35. You want to make sure that the pipe connecting the intake plenum to the tb flange is long enough to not hit the fuel rail. I did an 8" pipe at a decline of 10...

For sale is my 2002 Spec V w/ VQ swap. The body was damaged in the rear from a hit and run. The chassis is too expensive to repair but the parts are all undamaged. I want to sell the motor in the chassis because it's a complete VQ swap that runs great with all the issues worked out. Also you can...

Hello everyone I am new to Nissan's and purchased a VQ swapped 02 SER SpecV I was doing some research and came across this great site. Just wanted to introduced myself I work in Law enforcement and have average car knowledge. Before I was a Honda gearhead for about 10yrs so this is new...

Hello. New guy here. Just burnt the head gasket in my QR25. I have been looking for information on the VQ swap and have not been able to find anyone CURRENTLY doing these mod kits. looking to get in touch with someone that has done this before for some direction. Like a parts list needed. I know...

Posting pics The stock QR25DE in the 06 Nissan Sentra Spec-V After pulling the stock engine, ready for some real power The new engine is an 06 Nissan Maxima VQ35DE. We are going to pull it apart and build it with forged internals, metal head gaskets, ARP head studs and main studs, and cams...

We overlaid our 2JR/Treadstone Turbo (upper green line) on a bone stock QR with a 3" catback,2.5 downpipe at 10psi vs our 2JR VQ35 Sentra (lower green line) with equal length headers, 3" exhaust, 11.1 pistons, RevUp Cams. When I say bone stock on the QR, I mean it has balance shafts and no...

Looking to buy a VQ35DE, i have a 2000 Sentra GXE...i need some help with the whole process if someone could please help me out! not with the swapping part but just the useful info for beginners that i would need to get me started. such as pricing, what i would need, and etc. please and thanks...