A Nissan Sentra Forum banner

21 - 33 of 33 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #21 ·
What’s up you all, finally posting some pics and a few notes. First of all, I took off the intake manifold on the parts Spec to check the butterfly screws and found this:
IMG_20180408_191721.jpg
Wow. Needless to say I’m not mystified as to why the compression sucks on cylinder #4 anymore. Now I’m just mystified as to how this motor ran at all; how in the hell can a motor swallow a butterfly valve and 3 screws and live to run another day? I’ll be breaking this thing down some time over the next week to investigate, I’m eager to see what the internals look like after this bit of cannibalism. I’m wondering whether someone tried to address the butterfly screws on this motor previously and simply lost half the bits before reassembling it. Motor’s clearly toast at present, won’t know how good of a rebuild candidate it is until tear down.
IMG_20180409_191545.jpg
IMG_20180409_191528.jpg
IMG_20180409_191545.jpg
I pulled the transmission yesterday and was surprised to find stock pressure plate, clutch, and flywheel. The pedal feel was WAY different than my stock Spec clutch, I’m guessing maybe this car had some sort of issue with the hydraulics (slave cylinder?)? Anyway, I’ve disassembled nearly the entirety of the car at this point, so should anyone need anything the bits are ready to go. A few quick notes, Midnight V has first dibs on trans, clutch/flywheel, A/C compressor, and gauge cluster. Big Lettuce expressed some interest in the interior body harness (with the Rockford Fosgate wiring), so I’m keeping that aside for him should he need it. Otherwise I’m down to unload the rest of this stuff asap, here are some pics:
’02 ECU-$75 This car had the OBX 4-2-1 cat-less header on it, had no spacer on the 2nd O2 sensor bung, but didn’t pop any SES light. Not sure if this was a fluke (does it take a good bit of driving before the computer reads and reacts to duplicate signals from both O2’s?) or if anything had been done to this ECU previously. It has a sticker from a 2011 sale, maybe just a remanufactured unit the first owner bought before selling the car in the same year? You can see from the photos what I’m referring to, maybe you ’02-’03 owners can let me know if you’re familiar with this company.











Random trim pieces- $5-$10 apiece, just ask. If it’s little bits you’re getting, or if you’re buying a number of trim pieces, $5 apiece. Some assorted interior plastic trim pieces. I have literally ALL of the various interior bits with the exception of the sunroof control/sunglasses-holder/overhead console thing, so if there’s something you want that you don’t see here, holler at me and let me know what you’re looking for, I’ve probably got it.
IMG_20180409_185923.jpg
Gauge Cluster-$75 (Midnight V has 1st dibs) ~151,400K on odometer. All gauges function and work perfectly.
IMG_20180409_190016.jpg
Center storage bin w/ vents-$20
IMG_20180409_190056.jpg
HVAC Controls-$35
IMG_20180409_190034.jpg
Dashboard-$40
IMG_20180408_172557.jpg
IMG_20180408_172602.jpg
IMG_20180408_172637.jpg
IMG_20180408_172650.jpg

Center Console $40- In pretty good shape generally, but there are a few scratches and the pull-out cup holder is missing the left-side arm (see pictures below).

IMG_20180408_175658.jpg
IMG_20180408_175710.jpg
IMG_20180408_175735.jpg
IMG_20180408_175740.jpg
IMG_20180408_175845.jpg

Brake Pedal with Position Switch/Sensor-$25/ Throttle Pedal/Sending Unit- $25/ Clutch Pedal Assembly w/ Position Switches
IMG_20180409_190532.jpg
IMG_20180409_190550.jpg
IMG_20180409_190550.jpg IMG_20180409_190610.jpg

OEM Strut Tower Brace $40- There’s a small patch of very shallow surface rust on this (see below) that needs to be sanded and repainted, for an extra $10 I’ll handle that and make it look jazzy for you….. :47:
IMG_20180408_174410.jpg
IMG_20180408_174506.jpg

Center Dash Support-$20
IMG_20180408_180108.jpg

Steering Column- $30
IMG_20180408_180213.jpg

OEM Crash Bar w/ Styrofoam- $35
IMG_20180408_180445.jpg

Horn Module-$15
IMG_20180408_180505.jpg


CV Axles- $40 per, $65 for the pair
IMG_20180410_163422.jpg
IMG_20180410_163447.jpg
IMG_20180410_163455.jpg
IMG_20180410_163502.jpg

Rear Shelf (Minus Child Seat Anchor Covers)- $20
IMG_20180409_183757.jpg
IMG_20180409_183803.jpg
IMG_20180409_183810.jpg

ANYTHING ELSE YOU MIGHT WANT I LIKELY HAVE, GOTTA THIN THE PARTS HORDE LIST! IF YOU NEED SOMETHING AND DON’T SEE IT HERE, JUST HOLLER. A FEW DESIREABLE PARTS I’LL OFFER DEALS ON:
-OEM BUMPER COVER W/ WORKING FOGS
-SIDESKIRTS
-HOOD & FENDERS
-REAR TRUNKLID WITH SPOILER, ALL LIGHTS EXCEPT FOR TAILS
 

·
Registered
Joined
·
173 Posts
BUMP for a great seller, also I hope DaveSpecB15 got those headlights he did a SLAMMING job on them I actually want to see photos of the car (skeleton) now, eek!!!! I was shocked to find a 2006 non BIMBO model at my local boneyard all black. I have never seen the interior like that before the black seats with black center mesh clean car and honestly appeared totally unmodified not even the calipers were painted nothing aftermarket and this is RARE not even a K&N drop in air filter RARE for a Spec-V trim stock exhaust clean car didn't even have HID's dude I was like WTF!?!?!?!

But this BUMP is for SpecTribeSec06 thank you for the packaged items all items were packed properly and safely and arrived undamaged and perfect as shown I am just opening the harness/audio box today eek!!!
 

·
Premium Member
Joined
·
20,873 Posts
Man I got all super busy with life/work crap and kinda forgot all about it. And then been in penny pinching/no time mode. Not gonna be doing my front end swap any time soon. All I need is lights.

Feel free to sell them to someone else. Sorry to be that dude. They aren't a bad price. If no one else grabs them.....shoot me a pm again. Hopefully my penny pinching situation turns around soon.

I had to clear my inbox when they made me an admin. Don't even remember what price he told me.

Again....sorry to be that guy.
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #28 ·
What's up you all! I've been on a frantic job hunt of late and haven't had time or money to mess with my Spec much, but I wanted to let everyone know that I'm looking to wrap up on the parts Spec. One of my dearest friends just gave me his '01 LS Integra and I need the space, so I'm looking to sell or store all the parts I have left and be rid of the shell. Here's a list of the parts I've already sold:

-Transmission
-A/C Compressor
-All wiring harnesses
-Sunroof Motor
-SER Shift Knob
-Shift Cables (Still have the shift lever on it's base for sale)
-Driver's Door and Mirror
-Sunvisors
-Wheels
-Driver's-side and left rear window regulators/motors
-Radiator
-Instrument Gauge Cluster
-Throttlebody
-Headlights
-Taillights

I've still got the majority of the bits left, including the following parts that I'm surprised haven't piqued more interest:
-'02 OEM Bumper Cover and Foglights
-OEM Hood and fenders (original with matching VIN's)
-OEM Trunklid with Spoiler (also original with matching VIN), still has the license plate surround with lights, brake lights in the spoiler
-Dashboard
-Center Console w/ Armrest
-HVAC Control Cluster
-All of the interior plastic trim (except for the facia trim that goes over the HVAC, black piece with three round holes for the dials)
-***Still selling my complete '06 interior (seats and matching door cards) from my daily Spec, it's in good shape and it needs to exit my apartment before my gal decides to set it on fire!
-HVAC blower motor/heater core/Air Con Module
-QR25 w/ 151k BUT issues! Runs but has low compression on cylinder #4 (105 psi, the other 3 were 120-122 psi), see above for pics of the missing butterfly valve and screws on the intake manifold. This is a parts motor only for my mind, but I'll let it go uber cheap to someone who has use for some of the internals (i.e. crank, rods, etc.).
-Passenger front and both rear doors
-Power trunk release
-Fuel door release mechanism
-Charcoal canister with working vapor purge solenoid/valve
-E brake handle and cable assembly
-Rear Window shelf w/ speaker mounts
-Transmission Mounts
-OEM struts w/ springs from my '06 Spec- These are pretty well shagged after 220,000 miles in my ride, but the springs are fully intact.
-CV axles
-OEM Strut Tower Bar
-OEM Sway Bar
-'02 NATS ECU, non-ABS
-Antenna
-Windshield Wiper Motor, Assembly
-Original Front Crash Bar (perfect shape, including styrofoam)

I'm looking to sell what I can asap and be rid of the shell over the next few weeks, so PM me if there's anything you need. Feel free to make offers along with your requests, I'd rather sell this stuff cheap than stockpile a bunch of it or scrap it. I'm down to trade for certain b15 bits (looking for turbo bits and bump-steer spacers to use with the 2J springs I got from a member), 4 door b13 and SR20 parts (need a hood, body kit, or better yet.... a line on a good 4 door shell w/ minimal to no rust), and DC4 Integra parts (driver's side fender, driver's control window/lock switch, passenger window regulator and motor, ALL suspension parts). Thanks good Spec folk, ya'll have a great night!
 

·
Premium Member
Joined
·
20,873 Posts
If rain gives me a day off....a day off that I can't use to get super important work stuff done.....


I'll drive up in my truck.
 

·
Registered
Joined
·
173 Posts
August BUMP still got plenty of great parts priced competitively way cheaper than that 802 guy his prices are K2 high so get what you need here FIRST!
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #33 ·
My apologies you all, I've sold my parts car and no longer have any parts for sale. Thank you for your interest though, in the event I wind up with parts car I'll make mention of it here.
 
21 - 33 of 33 Posts
Top