A Nissan Sentra Forum banner

Boarder1186 / 2004 1.8Spec V / Long Island, NY

16K views 131 replies 32 participants last post by  yogi b 
#1 · (Edited)
What's up fellas, I'm Drew from Long Island, New York

I have a 2004 Molten Silver 1.8S, I bought brand new in summer of 2004 love the car and still do. The Sentra was an Automatic QG18de(1.8S) then I did a full SE-R Spec V Conversion to it in the summer of 2011 along with some upgrades over the past years. I did all the work, paint and fabricating the parts myself with a hand here and there from my father and friends who I thank very much!

It's an on going work in progress with blood, sweat and tears

Page 4 for the QR25de Motor and 6 Speed Manual Swap click here


Interior

2006 SE-R Spec V Dashboard Wiring Harness and Reinforcement Bar
2006 SE-R Spec V Gauge Cluster
Complete 03-04 SE-R Spec V Interior Conversion
Charcoal Carpet's
Nismo Charcoal Floor Mats
Reverse lockout
2J-Racing Brass Shifter Bushings
A-Pillar Tweeters
Rear Deck Subwoofer
Vanity Mirrors with Lights

Exterior
OEM Spoiler
Custom Mesh Grille
Custom Painted Lower Front Grille and Rear Valance
OEM Side Skirts (Reinforced/Fortified with Industrial Spray Foam)
Nismo Lip Replica (Reinforced/Fortified with Industrial Spray Foam)
My Custom Gunmetal 04-06 LED SE-R Tail Lights
Bi-xenon Projector Retrofitted SE-R Headlights with Morimoto Mini H1, Morimoto 3Five Ballasts, 6000k done by 02serious (Geoff)
Projector Retrofitted Blazer Fog Lights with Morimoto 3Five Ballasts, Morimoto 880 HID bulbs 6000K
S2K Antenna
Mesh Screen over the In Cabin Air Intake (prevents the Micro Filter/Fan getting debris in it)
Kuo's Garage Fender Washers
Rob's Aluminum Air Diversion Panel

Tires, Wheels and Brakes
TDMi 5 Lug Spec V Hubs 5 x 114.3
UNISA JECS's Spacer and Sleeves with (A32) Rear Hubs
2JR Forged 55mm Race Wheel Studs
2JR Hub Centric Wheel Spacers 15mm All Around, +8mm Front (22mm to clear Brembos)
D32 Altima Coupe SR 18" 45 offset Wheels
225/45R18 Firehawk Wide Oval Indy 500
TDMimports Black Valve Stems
2JR Forged Chromoly Black Lug Nuts
2006 SE-R Spec V Master Cylinder and Brake Booster
Brembo Brake Calipers
Power Slot Front Slotted Rotors 12.0" (redrilled for 5x114.3)
Rear Disk Brake Conversion with Brembo Brake Package Disk Brakes
Power Slot Rear Slotted Rotors 10.9" (redrilled for 5x114.3)
Hawk HPS Brake Pads
Stoptech Stainless Steel Braided Brake Lines (Rear)
Good Ridge Stainless Steel Brake Lines (Front switching to Stoptech)

Suspension and Chassis
Nismo Front Sway Bar
Nismo Rear Sway Bar
Nismo Strut Bar (Removed)
Nismo Control Arms
2JR Roll Center Kit
Energy Suspension End-Link Bushings
Tanabe Sustec Under Brace (4 Point Lower Tie Bar) (removed for repairs)
2006 SE-R Spec V Steering Rack
Rear-end Swap with Nismo Hard Bushings
Eibach Pro-Kit Springs
Koni Yellow Shocks with Front Strut Inserts
2J-Racing Anti Lift Kit
2J-Racing Bump Steer Kit V2
Weapon-R Torque Damper (Removed)
Energy Suspension Crossmember Motor Mount Inserts
Rob's UHMW Crossmember Washers (aka wheel hop aids)
TDMi Rigid Collar Subframe Insert


Power/Drivetrain
QR25DE Motor Swap
6 speed Manual Conversion
2J-Racing Brass Shifter Bushings
Fidanza Lightweight Aluminum Flywheel
Clutch Masters Stage 2 Clutch
2JR Hi-Power Intake Plenum
Nismo/AEM Cold Air Intake
2JR Alternator Clearance Bracket
Hotshot Exhaust Manifold
OEM Modified Mid-Pipe with a Bigger Secondary Catalytic Converter
Strömung 2.25 Cat-back Exhaust System
NGK Iridium Heat Range 6 Spark Plugs



Future Projects: VQ35




Summer 2011








2012 Engine Bay Shots




May 2010


Summer of 07


4 days after I bought her in Aug 2004



Rolling shot



 
See less See more
17
#131 ·
Still alive and kicking! When life gets busy gotta take care of stuff, but most importantly I still have the Sentra and moving on in to a new phase finally with some time off from work.

Anyone who needs an Electrician in the Long Island area gimme a shout!

VQ35 HR swap is what's happening, its been a slow on and off project but its gotta get done now or never will.





How she's looking nowadays











 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top