Joined
·
58 Posts
Ok so before I even tore the intake off to fix the butterfly screws, I had a low idle of 500 and it didn't bounce around
It just perfectly idles there. When its cold it will idle at 1000rpm and gradually drop to 500. I cleaned the throttle body
and I'm pretty sure its not the MAF. I have heard cam/crank sensors cause idle issues. Its not like it drives terrible but its
hard to take out of first when its studdering because the rpms are so low. Any thoughts?
It just perfectly idles there. When its cold it will idle at 1000rpm and gradually drop to 500. I cleaned the throttle body
and I'm pretty sure its not the MAF. I have heard cam/crank sensors cause idle issues. Its not like it drives terrible but its
hard to take out of first when its studdering because the rpms are so low. Any thoughts?