A Nissan Sentra Forum banner

1 - 20 of 152 Posts

·
Registered
Joined
·
2,902 Posts
Discussion Starter #1 (Edited)
Edited :If anyone by clicking likes on our fb page, you will recive 5 dollars discount on purchasing QT Adjustable link from us.



Our fb page, TDMimports. Make sure stop by and check it out!!


NO DIBS, FIRST COME FIRST SERVE.
For those don't know what QT Adjustable link is check here
GB: QT adjustable link and Drums to Discs brackets - B15sentra.net - Nissan Sentra Forum
Our newest design, Gen 3 QT Adjustable link available in stock now

Price:
Price: 110 shipped(free tracking&guarantee fast shipping )
If you are not in the lower 48 states or other area please contact me
(To Europe &Australia please add extra $20)

Pics:

Newest design:

 

·
Registered
Joined
·
2,902 Posts
Discussion Starter #4 (Edited)
Since majority all of you didn't see my promotion while I was waiting to get my vendor setted up. Now, I will offer 5 extra spots for b15 members here only. If you get a Qt adjustbale link from me and paid I will give you a free set of electron silver Kuo's Garage Washers. 5 people only...limited time offer until 06/30/2011.
 

·
Registered
Joined
·
3,379 Posts
is this a simple un bolt stockers, slide adjustables in and thats it??

OR

do i have to measure here there then locktite so they dont move etc?

the benefits seem worth the price.
 

·
Registered
Joined
·
2,902 Posts
Discussion Starter #8
is this a simple un bolt stockers, slide adjustables in and thats it??

OR

do i have to measure here there then locktite so they dont move etc?

the benefits seem worth the price.
1. do the measurement on both side wheels
2. Write down the measurement that you need to adjust
3. unbolt your stock SCL and set your QT adjustable link same length as your SCL
4. Use your measurment numbers to set on your QT adjustable link( extend it)
5. Put it back to your rear beam(axle)
6. Tighten the huge nut front bottom
7. lowered your car and check again
8 If it is good you are good to go and if not yo uwill need to repeat the process again from #1



throw me down for one spot if its still avaliable
Okay cliff
 

·
Registered
Joined
·
3,379 Posts
sounds good,

1 more question. Does the Link come out on its own or do you have to take out other parts to remove it? (is it a 30-40 min job or a 3 hour job is what im getting at)

Thanks!
 

·
Registered
Joined
·
2,902 Posts
Discussion Starter #12
sounds good,

1 more question. Does the Link come out on its own or do you have to take out other parts to remove it? (is it a 30-40 min job or a 3 hour job is what im getting at)

Thanks!
You will have to take out the part your own, and it SHOULDN'T come out it's own otherwise that will be too scary when you on high speed...

This is an easy job if you know what you are doing, but I would say for first time maybe 1 hour. When you know what yo uare doing, you probably only need 20-30 mins :D hope this help and if you have any questions please let me know
 

·
Registered
Joined
·
2,902 Posts
Discussion Starter #15
Since majority all of you didn't see my promotion while I was waiting to get my vendor setted up. Now, I will offer 5 extra spots for b15 members here only. If you get a Qt adjustbale link from me and paid(Prepaid). I will give you a free set of electron silver Kuo's Garage Washers. 5 people only...limited time offer until 06/30/2011.
EXRTA 5 spots for b15u.com members ONLY
<!-- google_ad_section_start(weight=ignore) -->
1.SentraInsanity/ paid
2.06blk_out/paid
 

·
Registered
Joined
·
2,902 Posts
Discussion Starter #19
Lol what if i already bough a Q-Link can i get the washer free :D just saying
:D you will see hahahaha right now i can't afford to give to many since i have sold..over 90 so that's.....freaking many people and I would bankrupt if....:eek:
But you will see:cool: always have suprised
 
1 - 20 of 152 Posts
Top