Leaving for reference but this is the hat that has a lower off set to allow use of the RCK ball joints with the 13" Wilwood BBK with out machining the current hats. All other dimensions remain the same.
Hey guys, so before I got this car, the previous owner noted that it needed new outer tie rods. When I test drove it I didn't notice any clicking or popping sounds when steering. This popping sound it makes is only at idle or very low speeds, such as making a 3 point turn. I replaced the outer...
Ok so lets put an end to the countless threads asking what springs are best or what drop will you get with what spring. Here we go:
Your Stock Spring Rates Are:
154F/247R - SpecV (all years)
134F/212R - SE-R (5spd/auto) and SE (w/PP)
134F/190R - 2.5S/LE/SE (w/o PP)
123F/190R - 1.8S/GXE/XE...
Hi guys, new here.
My buddy and I just bought a beat up 06 Spec V to do a little dirt track racing with. The car was mostly a parts car for interior pieces...aaaaaand the brakes. Nothing there. My question is this:
When shopping for brakes...are there any mounting differences between the SE-R...
My freind has a 03 sentra ser, we tried to remove the struts/ shocks in the rear of the car yesterday. We had no problem getting the two nuts that hold the top of the shock to the car but ran into problem with botomm bolt and nut. There was a metal falnge that covers both sides of the nut so...