[Richardw72]

I replaced the left inner fender liner and bought more clips to keep it in place.

I also replaced the right fog light.

 

[Richardw72]

Put more stickers on it.
I finished
Left Rear Quarter Panel
Right Rear Quarter Panel
Trunk
Left Side Skirt
Right Side Skirt
And both mirrors today.
I also added LEDGlow logo to the back window of my car. That is the brand my underglow is.

 

[Richardw72]

That LEDglow stuff looks sick. U doing the wheels too or just underbody ?

I think I’ll just have the underglow. I’m not really a fan of neons around the wheels tbh.

Here’s a picture of the Neons when I first put it on. In this photo the Mirrors and the quarter panels were not stickerbombed yet

 

[Richardw72]

Yes Sir

 

[Richardw72]

I just think it will look ugly. I think underglow looks good but I don’t want my car to be an entire light show you know? Have you ever seen those cars Where they have interior neons, underglow, neons around the headlights, neons around the license plate, etc etc. It’s just too much in my opinion.

 

[Richardw72]

Not today, but Saturday, installed a harness bar and had to do some hardware and location/positioning with my in cabin adjustable floor bar. End up cutting some carpet out and positioning the bar different then normal.

Do you daily drive your car?

Are harnesses safe with a harness bar?

I’ve read some things where people in their daily drivers would install a harness and a harness bar and when they would get in an accident they would either be paralyzed or dead from the harness keeping their body in place but not their head and neck.

I thought it would be kinda cool to install a harness and harness bar but I’d rather be safe than look “cool”

 

[Richardw72]

I daily and I don't have a harness yet and there is the added benefit of it being a brace as well to stiffenthe chassis.
People dying or paralyzed is of sure to several issues such as improper installation, improper positioning and inferior material/product in regards to the bar. The harness on the other hand needs to be installed a certain way to cause no harm such as the angle the harness is at, iirc it can your spine to compressof done wrong.
Harness are safer than seat belts when installed properly... actually we had a member along time ago that... rolled over or had a side impact of some sort...i don't remember but he did have a bar that helped reduce the crumpeling of the car.

Will a harness stop your head from jerking around when in an accident?

 

[Richardw72]

Replaced the air filter with a K&N air filter and just replaced the front brake pads.

 

[Richardw72]

Cause wtf not?

That is fucking clean my dude. Nice job! Did you do that or did someone else?

 

[Richardw72]

1. Rotated the tires
2. Did an oil and transmission oil change.
3. Idler Pulley was squealing so had to replace that
4. Serpentine belt snapped so I replaced that
5. Replaced the inner and outer tie rods
6. Got the front realigned
7. Car was horribly shaking anytime applied the brakes, so I replaced the rotors. Turned out the front 2 rotors were different.

I noticed another loud thudding noise that speeds up and down when the car accelerates. It happens on the passenger side. At first I thought it may’ve been a bubble in the tire but they look fine and it happened before and after the tire rotation.

 

[Richardw72]

Lowered the car with coilovers and changed the brakes.

 

[Richardw72]

Stickerbombed roof.

 

[Richardw72]

Not even the interior is safe.

 

[Richardw72]

Washed the wheels and tires.
Painted the tire lettering.

 

[Richardw72]

So what you are saying is that I "mind fucked you" or "skull fucked you"...

I’m so lost...

 

[Richardw72]

Scraping out this sound deadening shit. It’s a pain in the ass but it’s getting done.

 

[Richardw72]

-Removed all the flooring in the front
-Removed blown rear deck speakers
-Removed blown Rockford Fosgate sub
-Scrapped out more sound deadening
-Removed whatever is the thing on the A Pillar
-Removed roof liner

 

[Richardw72]

Gutted

Radio
Cup Holders.
Center Console

 

[Richardw72]

Installed a Cold Air Intake

 

[Richardw72]

Na 205whp, full weight, no slicks
Falken azenis 255 40 17

Sent from my SM-A115AP using Tapatalk

14.6